HEXA

REAR AXLE 33 A. Total amount of space measured without ring gear.  Measurement A ‗‗‗‗‗ B. Total amount of space measured with gear set assembled in carrier  Measurement B ‗‗‗‗‗ C. Measurement A minus Measurement B dimensions  Measurement C ‗‗‗‗ Assemble shim pack using dimension determined in A, B, C adjusting the packs as described below. RING GEAR SIDE Assemble shim pack to measurement B- 0.125 mm or B- 0.005” mm OPPOSITE SIDE OF RING GEAR Assemble shim pack to measurement C. Add shim thickness 0.20 mm or 0.008” for differential bearing preload and backlash. 14.Install side bearing cone on hub of differential assy. And place bearing cup along with selected shim pack in between side bearing and carrier assembly and press with the help of dolly (Part No.289458903509) 15.Repeat this procedure for installation of shims / bearing cone on opposite side of differential case. 16.Install spreader and dial indicator. Spread the carrier. Do not spread it over 0.58 mm. 17.Remove dial indicator. Install differential case assembly into carrier with the help of mallet and remove the spreader. WARNING Carelessness while installing differential case assembly may result in injury.