HEXA

FRONT AXLE (4X4) 15 9. Remove front wheel speed sensor ( For procedure refer Brakes - ABS section ) and remove the bracket from the knuckle. 10.Loosen and remove the mounting nut of ARB (Anti roll bar) link assembly from stub axle. CAUTION Allen key has to be used to hold the ARB link while loosening or tightening to avoid damage to the link (For procedure refer ARB removal in Front suspension section) 11.Remove the drive shaft nut which was loosen earlier. 12.Disconnect upper wishbone ball joint . (For procedure refer suspension upper wishbone ball joint removal section) WARNING  When the knuckle is disconnected from the upper wishbone the knuckle may fall outwards towards the operator. Hence supporting it is very essential. If proper care is not taken it may cause injury.  The upper wishbone might spring upwards when released from knuckle, hence special care should be taken.