SAFARI STORME MY14

ELECTRICAL 70 8.9.3.2 FRONT WIPER ARM AND BLADE REMOVAL 1.Pry out the Plenum centre grill assembly and disconnect the washer jet pipe connection. 2.Remove the rubber cover. 3.Remove mounting nut of wiper arm assembly. 4.Take out the wiper arm and wiper blade assembly from the shaft. 5.Press the lock button and push down the blade assembly from its location and take out the wiper blade assembly from wiper arm. INSPECTION: Inspect wiper blade rubber for any cut. If found, replace the wiper blade assembly. REFITMENT: 1.Before fitting the wiper arm and blade assembly bring the wiper motor to the parking position. This can be done by switching ON the Ignition and giving a single wipe. NOTE: Switch OFF the Ignition only after the motor has stopped. 2.Fit the wiper arm in its parking position to the shaft locating it on the splines so that the wiper blade is just clear of the windshield glass. As shown in the below figure.