SAFARI STORME MY14

ANTI LOCK BRAKING SYSTEM (ABS) 18 6. Lift the right side (when viewed from front) damper element (1) from the ECU mounting bracket (2). 7. Slightly tilt the Unit forward (towards firewall) and release the centre pin (1) from the centre damping element (2) on the mounting bracket. 8. Lift the Unit to release the left side (when viewed from front) damping element (1) from the mounting bracket (2). NOTE 1. ABS ECU /HCU is not serviceable. 2. Refer ABS troubleshooting for faults related to ABS ECU. INSTALLATION 1. Follow the reverse order of removal to install the ABS modular on the mounting bracket i.e. a. Insert the left side damping element. b. Slightly tilt forward and insert the centre pin in centre damping element. c. Insert the right side damping element. d. Ensure that the ECU is seated properly and tighten the holding nuts to a torque of 0.8 ± 0.2 Kg-m. 2. Reconnect the brake lines. Be certain that the brake lines have been connected to the correct ports to ensure proper ABS operation. Tighten the coupling nut to specified torque. (1.4 – 1.8 Kg-m) 3. Connect the ECU connector. 4. Bleed the brake system. NOTE For brake bleeding procedure conventional/ using diagnostic tool refer Brakes group. 5. Clear all faults using diagnostic tool. 6. Road test the vehicle to ensure proper operation of the conventional brakes and ABS system.