SAFARI STORME MY14

FRONTAXLE (4X4) 48 D. INTERMIDIATE SHAFT AND AXLE SHAFT DISMANTLING 1. Clean the oil from the disconnect housing with the help of cotton waste. 2. Remove the oil seal with the help of oil seal puller (Part No. 289458903516) from the disconnect housing. NOTE After removal from disconnect housing, discard the oil seal and use new at the time of assembly. 3. Remove the circlip which locks the axle shaft in the disconnect housing. For removal of circlip use circlip plier or any other suitable tool. NOTE Tool should not damage the splines on the axle shaft this affects the disconnect operation. 4. Pull out the axle shaft from wheel end side of the disconnect housing. NOTE The shaft is loaded with thrust washer. Remember the sequence of their fitting. Also replace the bush pressed on side with new one while assembly. 5. Remove the shifter sleeve and Thrust washer from disconnect housing and slide out the inter- mediate shaft from wheel end side of the disconnect housing.