SAFARI STORME MY14

BODY 75 BODY Fix the end bead at the lower end of the glass. End bead should not come out of the glass edge. Start the end beading fixing approximately from any gap between the edges of end bead. Clean the glass and painted surface with the cleaner TEROSTAT – 8550. Allow it to dry completely. Apply a thin and even coat (approximately 0.5mm thick) of PRIMER TEROSTAT-8511 on the glass. Allow it to dry for 2 minutes. Apply thin and even coat (approximately 0.5mm thick) of PRIMER TEROSTAT- 8521 on painted surface. Allow it to dry for 2 minutes. Apply sealant TEROSTAT-8590 on the glass with the applicator nozzle. Mount the glass on the body flange within 20 minutes. Wipe of the excessive spill off with clean dry rags. Do not use ISOPROPANOL. Keep it position for minimum 30 minutes. Do not drive the vehicle for 2Hrs. REAR QUARTER GLASS REMOVAL 1. Remove rear quarter trim. (For procedure refer rear quarter trim removal procedure in this section) 2. Remove “D” pillar trim. (For procedure refer “D” pillar trim removal procedure in this section) 3. Remove “C” pillar trim. (For procedure refer “C” pillar trim removal procedure in this section) 4. Cut the sealant with a thin sharp blade from the inside. ! CAUTION Do not damage the embossed rear demister lines .