SAFARI STORME MY14

SUPPLEMENTARY RESTRAINT SYSTEM (SRS) 18 7. Loosen and remove four mounting nuts from the rear side which holds the air bag bracket with the PAB module. 8. Carefully separate the holding bracket from the PAB unit. FITMENT For fitment follow the reverse procedure of removal NOTE Connect the diagnostic tool and clear fault codes, if any 11.1.6.2.4 CLOCK SPRING Clock spring is a spirally wound wire coil (not a slip ring) mounted on steering column. This single-wire type contact reel (clock spring) design ensures most reliable contact possible between air bag module assembly and crash sensor. It also provides the electrical continuity for airbag and horn The clock spring only needs to be replaced when the connectors that attach to the driver airbag is melted and fused directly to the DAB module. During a de- ployment the gas conversion creates a heat ex- change inside the DAB module and that causes connectors to melt. LOCATION Clock spring is mounted on the steering column along with the Combi-switch.