SAFARI

35 BODY 15. REMOVAL / INSTALLATION OF FRONT BUMPER (Fig. 21) REMOVAL l Remove the mud cover over side bracket. l Remove the electrical connections for fog lamps. l Open the plastic cover at both side of front number plate and remove the two bumper mounting screws after properly supporting the bumper and then remove the crash guard. l Pull out the bumper. INSTALLATION l Support the bumper and complete the electric connections for fog lamps. l Align both ends of front bumper with two welded pins on either side at fender. l Loosely mount the front bumper on sidemounting screws. Fix 2 hex. fl bolts (M10x25) and washer (A10.5) at the both sides of front number plate. l Adjust side gap by tightening/loosening the adjusting screws. l Adjust the vertical gap by moving the bumper manually. l Tighten all fasteners once the bumper gap is set and close the covers at front side. l Fit the mould cover over the side bracket with the help of a hex. fl. bolt (M8x20) and a button. Fig. 21. 1. COVER 2. LOCATION OF MOUNTING SCREWS FRONT 3. LOCATION OF SIDE ADJUSTING SCREW 4. ADJUSTINGSCREW 1 2 3 4