SAFARI

36 BODY 16. REMOVAL/INSTALLATIONOFREAR BUMPER (Fig. 22) REMOVAL l Remove the two screws of each side strip mounting bumper with the rear wheel arch at both sides. l Remove the mud flap from the side mounting bracket from both sides. l Remove the electrical connections for fog lamps and number plate lamps. l Support the bumper and remove the two nuts from each rear mounting bracket from below the bumper. l Pull out the bumper. INSTALLATION l Support the bumper and complete the electrical connections for fog lamps and number plate lamps. l Loosely mount the bumper on side adjusting screws. l Fit the 2 hex. fl. nuts (M8) and washers (8.4) on each bracket, loosely from below the bumper. l Adjust the gaps and once they are set tighten the nuts and adjusting screws. l Fit the mud flap on side bracket at both sides. l Tighten the two screws of each side strip with the wheel arch at both sides. Fig. 22. 1. LOCATION OF MOUNTING SCREWS FRONT 2. ADJUSTINGSCREW 3. LOCATION OF STRIP MOUNTING SCREWS 1 2 3 3