SAFARI

34 BODY 14. REMOVAL/INSTALLATION OF FENDER (Fig. 19 & 20) REMOVAL l Open the bonnet. l Disconnect side indicator connection and remove the side indicator lamp by removing the spring clip from under bonnet at RH and LH sides. l Remove the front bumper. Refer “Removal/ Installation of front bumper”. l Remove the side mould over the wheel arch. Refer removal installation of plastic moulds. l Remove the rubber pads on fender top channel. l Remove the mounting screws on fender (five on top, one front screw, one rear bottom screw and two rear middle screws) and remove the fender. INSTALLATION l Mount the fender in position and fix the mounting screws. l Fit the side mould on wheel arch. l Fix the side indicators by securing the spring clips. l Mount the front bumper. Refer 'Removal/ Installation of front bumper'. l Fix the rubber pads on top fender channel for supporting bonnet. Fig. 19. 1. FENDER Fig. 20. 1 1. LOCATION OFTOP MOUNTING SCREWS 2. LOCATION OF FRONT MOUNTING SCREW 3. LOCATIONOF REAR BOTTOMMOUNTING SCREW 4. LOCATION OF REAR MIDDLE MOUNTING SCREWS 5. BUTTON LOCATION FOR MUD FLAP 1 2 3 4 5 1