SAFARI

16 REAR AXLE Use a suitable drift to remove the roll pin retaining the cross shaft. Fig. 18 Use hammer and punch as shown to remove the cross pin from the case. Fig. 19 Install the adapter plate of track lock tool Pt. no. 2699 5890 3501 into the bottom side gear. Apply a small amount of grease to the centering hole of the adapter plate. Fig. 20 Install threaded adapter of track lock tool into top side gear. Screw into threaded adapter until it is centered into adapter plate. Use small screw driver to prevent the adapter from turning. Fig. 21 Fig. 19 Fig. 20 Fig. 21 Fig. 18