SAFARI

15 REAR AXLE Remove differential bearing Using Press Pt. no. 2698 5890 3515; Adapter, differential bearing cone Pt. no. 2698 5890 3502; Adapter plug, differential hub Pt. no. 2698 5090 3501; Adapter ring Pt. no. 2698 5890 3516. Fig. 14 Identify shims and bearing of which side they are removed. If shims are damaged, replace with new shims at the time of assembly. Reposition case in puller and remove other bearing cone. Note: It is always preferred to replace the bearing once pulled out but one can confirm the free rolling of the bearing and reuse it. Remove the ring gear screws. Fig. 15 Remove ring gear. If required tap ring gear with a mallet to free it from case. Fig. 16 Note: Discard ring gear screws and replace with new ones. Remove differential case from the axle shaft and remove ring gear. Clamp one of the axle shaft in vice firmly. Fig. 17 Caution: Vise jaws should not locate on axles splines or any machined surfaces. Install the differential on axle shaft. Fig. 14 Fig. 17 Fig. 16 Fig. 15 Press Adapter Adapter Ring