SAFARI

17 REAR AXLE Torque driving bar of track lock tool to collapse the Belleville plates. Remove both pinion mate spherical washer. Use a shim stock of 0.76 mm thickness or an equivalent tool to push out the spherical washers. Fig. 22 Relieve the tension of the Belleville plates by loosening the driving bar. Suitably rotate the pinion mate gears and take them out. Fig. 23 Hold top clutch pack with one hand remove special tools. Remove top side gear and clutch pack. Fig. 24 Note: Keep the pack of plates and discs intact in exactly the same position. Remove the case from the axle shaft. Turn case with the ring gear side up and Remove step plate, side gear and clutch pack. Fig. 25 Remove the retainer clip and allow separation of the plates and discs. Fig. 22 Fig. 25 Fig. 24 Fig. 23