639 / 745
BODY
66
1.4.56 SUNROOF RESET PROCEDURE - SELF
LEARNING THE POWER SUNROOF
Please first read and note the introductory
information and attention to WARNINGS!
Self learning the sunroof shall be only done after
completion of Initializing the sunroof
Self learning command procedure:
1. Sliding sunroof and Sunshade Rollo shall be
in open position within 4mm to 200mm from
the cutout.
2. Close the sunroof fully by pressing sunroof
close switch and keep the switch pressed
continuously. Do not release the switch and
wait for following actions to perform.
• Sliding sunroof will start opening after 5
sec pause and close fully automatically.
3. Release the Switch to complete the
procedure.
4. Close the Rollo fully by pressing Rollo close
switch and keep the switch pressed
continuously. Do not release the switch and
wait for following actions to perform.
• Rollo will start opening after 5 sec pause
and close fully automatically.
5. Release the Switch to complete the
procedure.
NOTE
Incase Close switch is released in the middle of
procedure, repeat from step 1.