367 / 948
BRAKES
37
Remove the upper sliding bolt and take out the
caliper housing. (Lower sliding bolt is already
taken out while removing the pads.)
FITMENT
For fitment follow the reverse procedure of
removal.
B. BRAKE DISC REMOVAL
FRONT BRAKE DISC REMOVAL
For front brake disc removal refer Front Axle
section.
DISC INSPECTION
Before assembling the caliper back to the carrier,
the disc should be inspected.
The disc should be cleaned with dry cloth, oil
traces to be wiped out completely.
The disc should be free from score marks. If
scored, it should be ground and refitted.
NOTE
Minimum thickness of front disc = 24mm
After fitment, the run out of the disc should be
measured.
(For procedure refer disc run-out
measurement procedure.)
The run out should be
less than 0.060 mm otherwise pedal pulsation will
be felt during brake application.
NOTE
Before assembly clean the mating faces of the
hub and brake disc.
FITMENT
For fitment follow reverse procedure of removal.