928 / 1265
ELECTRICAL
24
3. No output from BCM
Refer BCM diagnosis
Reverse lamp not working
1. Grounding point no. E00 loose Tighten grounding properly
2. Bulb fused
Replace bulb if blown
3. 8 pole tail lamp connector
loose.
Fix the connector properly
Stop (Brake) lamps not
working
1. 8 pole tail lamp connector
loose
Tighten the connector properly
2. Bulbs fused
Fix the bulbs properly. Replace bulbs
if blown
3. Brake lamp switch faulty
Replace switch
Stop Lamps are controlled by BCM. If issue not resolved by above
methods, BCM diagnosis should be referred.
Stop(Brake) Lamp and High
Mounted Stop Lamp not
working
1. Stop Lamp and High Mounted
Stop lamp 10A. Fuse in Cabin
Fuse Box Blown
Replace Fuse
Single front parking lamp not
working
1. Head Lamp connector
Fix connector properly(10 pole) loose
2. Grounding point loose
Tighten the grounding properly
3. Bulb fused
Fix the bulb properly. Replace bulb if
blown
4. Parking lamp LH/RH fuse (5A)
Cabin fuse box loose/blown the
circuit and then replace
Fix the fuse properly in the base. i n If
blown, check for short in the fuse
Single rear parking lamp not
working
1. Grounding point loose
Tighten grounding properly
2. Parking lamp LH/RH fuse(5A)
Cabin fuse box loose /blown
Fix the fuse properly in the base, i n if
blown, check for short in the circuit
and then replace the fuse
3. Bulb fused
Replace bulb if blown
4. Battery supply not reaching
lamp LH/RH fuse input the
discontinuity in the circuit.
Check the continuity from p a r k i n g
battery to the lamps through the
combi-switch, Front W/Hand Floor
W/H connectors and rectify
Both parking lamps not
working at all
1. Combi switch connectors loose Fix the connectors properly
2. Combi switch faulty
Replace combi –switch
Registration plate lamp not
working
1. Bulb fused
Replace bulb
2. Grounding point loose
Tighten grounding properly
3. 2 pole lamp connector loose
Fix connector properly