NEXON

ELECTRICAL

3. No output from BCM

Refer BCM diagnosis

Reverse lamp not working

1. Grounding point no. E00 loose Tighten grounding properly

2. Bulb fused

Replace bulb if blown

3. 8 pole tail lamp connector

loose.

Fix the connector properly

Stop (Brake) lamps not

working

1. 8 pole tail lamp connector

loose

Tighten the connector properly

2. Bulbs fused

Fix the bulbs properly. Replace bulbs

if blown

3. Brake lamp switch faulty

Replace switch

Stop Lamps are controlled by BCM. If issue not resolved by above

methods, BCM diagnosis should be referred.

Stop(Brake) Lamp and High

Mounted Stop Lamp not

working

1. Stop Lamp and High Mounted

Stop lamp 10A. Fuse in Cabin

Fuse Box Blown

Replace Fuse

Single front parking lamp not

working

1. Head Lamp connector

Fix connector properly(10 pole) loose

2. Grounding point loose

Tighten the grounding properly

3. Bulb fused

Fix the bulb properly. Replace bulb if

blown

4. Parking lamp LH/RH fuse (5A)

Cabin fuse box loose/blown the

circuit and then replace

Fix the fuse properly in the base. i n If

blown, check for short in the fuse

Single rear parking lamp not

working

1. Grounding point loose

Tighten grounding properly

2. Parking lamp LH/RH fuse(5A)

Cabin fuse box loose /blown

Fix the fuse properly in the base, i n if

blown, check for short in the circuit

and then replace the fuse

3. Bulb fused

Replace bulb if blown

4. Battery supply not reaching

lamp LH/RH fuse input the

discontinuity in the circuit.

Check the continuity from p a r k i n g

battery to the lamps through the

combi-switch, Front W/Hand Floor

W/H connectors and rectify

Both parking lamps not

working at all

1. Combi switch connectors loose Fix the connectors properly

2. Combi switch faulty

Replace combi –switch

Registration plate lamp not

working

1. Bulb fused

Replace bulb

2. Grounding point loose

Tighten grounding properly

3. 2 pole lamp connector loose

Fix connector properly