NEXON

CLUTCH

Do not use any screw driver or other type of

steel material to rewind the adjuster ring. You

might damage the mechanism.

In any of the cases do not deform the dead stop

ring.

When SAC or disc fell down on the floor do not

use it again.

Pay attention to "GEAR BOX SIDE" mark to

ensure correct assembly of clutch disc

Do not assemble an used SAC together with a

new disc or vice versa.

FITMENT

For fitment follow the reverse order of the removal

procedure, using the Clutch Mandrel. However,

following care must be taken during installation.

Clean friction face of flywheel by dry clean cotton

and check for cracks, scoring, burn marks or

unevenness. If there are any defects replace he

flywheel.

NOTE

not

machine the flywheel.

Install SAC assembly (Before installation ensures

that the disc face stamped with ‘Gear Box side’

mates the pressure plate face). Press aligning

mandrel through the SAC assembly on flywheel

by locating the front end of the mandrel in

crankshaft.

Ensure correct flywheel side & pressure plate side

of clutch disc.