HEXA

ELECTRICAL

10.SIDE REPEATER LAMPS

(Part of ORVM)

Side repeater lamps

on ORVM not

working

1. Connectors at the lamps loose.

1. Fix the connector properly.

2. LED's not working

2. Replace ORVM.

3. BCM o/p wire loose/short to ground.

3. Repair the wiring harness.

4. Combi switch faulty.

4. Replace combi switch.

5. Grounding point loose.

5. Tighten the grounding properly.

11.MOOD LAMPS

Single Mood lamp

not working.

1. Wires pinched / cut in Floor LH/ RH

wiring harness wrt non-working lamp

Rectify / Replace harness

Faulty Mood Lamp Module

Check the working module for same

zone (Front zone – Driver Door and

Co- Driver Door and both foot- well

lamps, rear zone – Rear LH and

NOTE:

Lamps form same zone are identical and different zones lamps are having

different LIN identification

Should not check direct voltages at Mood Lamps as these lamps are driven on

LIN communication.