841 / 1863
TRANSMISSION
26
18. Loosen the oil cooler line screw by using a
H12 wrench.
19. Remove the oil cooler lines.
CAUTION:
The automatic transmission fluid may flow out the
holes. Put a container under transmission cooler
holes.
20. Remove and discard the cooler line O-rings.
21. Put a container under the cooler lines and
flush the transmission cooling circuit.
22. Loosen the 2 drive flange screws by using a
H16 wrench.
23. Using a H9 wrench, turn the selector shaft out
of park to allow propeller shaft turning and
access to the other drive flange screws.