895 / 1232
BODY
54
FOLLOWING GUIDELINES WILL HELP TO
PROTECT BOLT FROM CORROSION
PROPER CLEANING:
In order to protect New BOLT / ZEST from
corrosion it is recommended to wash BOLT and
ZEST thoroughly and frequently in case:
There is a heavy accumulation of dirt and
mud especially on the underbody.
It is driven in areas having high atmospheric
pollution due to smoke, soot, dust, iron dust
and other chemical pollutants.
It is driven in coastal areas removed
thoroughly so that these parts are not
subjected to dampness that might be present
in the mud.
Make use of mud-flaps to protect the painted
surface and wheel-arch coating from the
abrasive action of mud and impacting stones.
PERIODIC INSPECTION:
Regularly inspect for any damage in the paint film
such as deep scratches and immediately get them
repaired, as these defects tend to accelerate
corrosion.
PROPER PARKING:
Always park the vehicle in shade to protect it from
harsh sunlight or in a well-ventilated garage so
that there is no dampness on any part of the
vehicle.
WASHING NEW BOLT
Follow these tips while washing new BOLT /
ZEST.
HAND WASH:
Always wash in shade and when the surface
is at room temperature.
Wash with mild car wash soap like "Car
Shampoo" and use a soft 100% cotton cloth
to avoid scratches. Please take help of your
dealer to buy the right products.
Please be sure to remove the wristwatch and
wear soft gloves to avoid scratches due to
finger rings or nails.
To remove stubborn stains and contaminants
like tar, use turpentine or cleaners like "Stain
Remover" which is safe for painted surfaces.
Again your dealer can help you in selecting
the right product.
Avoid substances like petrol, diesel,
kerosene, benzene or other solvents that
cause damage to paint
Dry the vehicle thoroughly to prevent any
damp spots.
Rinse all surfaces thoroughly to remove any
traces of soap and other cleaners as this
may lead to the formation of stains on the
painted surface later.