Background Image
Table of Contents Table of Contents
Previous Page  773 / 1235 Next Page
Information
Show Menu
Previous Page 773 / 1235 Next Page
Page Background

STEERING

44

11.Do

not remove the protective cap from the input

shaft during transit or before assy.

12.Do

not remove the protective cap from the OBJ

during transit or before assy.

13.Do

not start the engine without filling power

steering fluid in the System.

14.Do

not do the wrong entry of the tread at pres-

sure & Return port when connecting the

hydraulic pipes in Steering gear.

15.Do

not use cotton waste for cleaning.

DO’S

1. Lift steering gear by holding mountings / body /

cylinder only.

2. Store / transport steering gear resting on body /

cylinder only.

3. Use steering gears on ‘first in first out’ basis.

4. If any steering gear is dropped, inspect for dam-

age before using.

5. If any bellow is found damaged, replace it imme-

diately with a good part & with proper position of

clips

6. If any bellow clip is found missing, do not use the

defective steering gear. Instead use another new

steering gear

7. If the steering gear is off the vehicle, all ports

should be covered with protective plugs to avoid

contamination.