148 / 1428
142
ENGINE 273 MPFI
•
Fit the strainer assembly to water and oil pump
assembly.
•
Apply
SEALANT LOCTITE 5910
black colour on
oil sump mating surface on block to ensure leak
proof joint.
NOTE
For best results, clean and dry all surfaces with a
residue free solvent.
Apply continous and even bead of silicone to one
surface surrounding all bolt holes.
Remove excess with knife at once. Assemble
parts immediately.
Do not squeeze out silicone by overtightening
bolts.
Retorque will not be necessary.
Cures to touch in an hour and fully cures in 24
hours measured at 21ºC and 50% relative
humidity.
CAUTION
Risk:
Methyl Ethyl Ketoxime, which may cause eye
irritation and may cause sensation if in contact with
skin, if released during curing.
Safety:
Avoid contact with skin and eyes. Keep
out of reach of children.
First Aid:
In case of contact with eyes, rinse off
immediately with plenty of water and contact a doctor
or Poisonous Information Centre. If swallowed, do
not induce vomiting, contact a doctor or Poisonous
Information Centre immediately and show the
container or the label. After contact with skin, wash
immediately with plenty of soap and water. If effect
persists, seek medical attention.
•
Fit the oil sump on engine block mating surface.
•
Tighten the hexagonal mounting bolts to the
specified torque.