148 / 896
144
ENGINE 273 MPFI
•
Tighten the hexagonal mounting bolts to the
specified torque in a proper sequence (diagonally
opposite).
•
Assemble the clutch disc and clutch pressure plate
assembly usingmandrel (Part No. 2834 5890 25 01)
•
Tighten the mounting bolts of clutch disc to the
specified torque.
•
Fit the oil pump and water pump housing oil seal
using drift.
•
Fit the sensor wheel properly by locating the key
on crank shaft.
CAUTION
Ensure that step on sensor wheel should be facing
away from engine block.