378 / 1575
GEAR BOX
55
NOTE
Make sure that the bush lug is properly seated in
the extension arm slot.
7. Assembly extension arm with the insert block by
tightening two nyloc nuts.
8. Slide the rubber bellow at the bottom of the gear
shifter lever and place the bushes (2 Nos.) on to
the gear shifter lever.
9. Assemble the shift link if dismantled.
NOTE
•
All bushes should be properly checked before
assembly.
•
Always apply grease 3% MOS 320 on the pins
and inner surface of the bushes before assem-
bly
.