1.2L REVOTRON ENGINE 102 3. Remove the belt. FITMENT For fitment follow the reverse order of removal. CAUTION Ensure that the tool is correctly located during the belt fitment process. Make sure that while rotating the crank shaft pulley the belt should not slip away from AC Compressor pulley. J. TIMING BELT REMOVAL 1. Drain and collect engine oil. 2. Remove RH side front tyre. 3. Remove RH side mud liner and wheel arch liner. (Refer Body section for removal procedure). 4. Remove compressor and alternator belt. 5. Disconnect and remove engine wiring harness mounted on head cover. Set the wiring harness aside.
RkJQdWJsaXNoZXIy MTIwNTUz