HV ELECTRICAL SYSTEM 71 C. A, B, & C MOUNT FITMENT SEQUENCE STEP 1 First place A & B mount brackets on BIW. SCR M10X1.25X30 TS17070 10.9SS8451S2-YH, - 4 Nos. Do torqueing as recommendation. "HEX FL BOLT M10X1.25X40 TS1713010.9 – 2 Nos. Do torqueing as recommendation. Before assembly, ensure centralization of powertrain. Mounts should not be pre stressed in any direction. Torqueing sequence for Mount to BIW. TIGHTENING TORQUE = 5.5-6.0 Kg-m. Image is for reference purpose only. STEP 2 Add 1.5mm THK washer at A mount to arm joint. SCR M10X1.25X30 TS17070 10.9SS8451S2-YH ,- 4 Nos. Do torqueing as recommendation. NYLOC NUT M10 IS7002-10-SS8451S2YH ,- 1 Nos. Do torqueing as recommendation. H/FL BOLT M10X40 TS1713010.9SS8451S2-YH- 3 Nos. Do torqueing as recommendation. H/FL BOLT M8X28 TS17130 10.9SS8451S2-YH, NYLOC NUT M8 IS70028-SS8451S2- 3 Nos. Do torqueing as recommendation. HEX. FL. NUT M12X1.5 - 10 ISO12126, Do torqueing as recommendation. Torqueing sequence for Mount to brackets & Cradle. TIGHTENING TORQUE 5.5-6.0 Kg-m 6.0-6.5 Kg-m 6.0-6.5 Kg-m 3.0-3.5 Kg-m 10.0-11.5 Kg-m Image is for reference purpose only. STEP 3 C mount bracket is bolted with transmission assy. FL SCR M10X1.25X25 TS17130 8.8SS8451S2-Y ,- 4 Nos. Do torqueing as recommendation. FL SCR M10X1.5X40 8.8 GRADE, 2 Nos. Do torqueing as recommendation. Torqueing sequence for C Mount Bracket to transmission
RkJQdWJsaXNoZXIy MTIwNTUz