HV ELECTRICAL SYSTEM 42 F. Loosen and remove the boll joint bolt of lower arm both LH & RH side. G. Apply brake and remove drive shaft lock nut on both LH and RH side. H. Drain the TCS coolant and Remove the pump (Refer Coolant draining & Pump proceduer for removal process). I. Remove drive shaft by pulling disk brake and Take out drive shaft LH / RH from gearbox. (Drain oil before carrying out this process). J. Remove the 3 in 1 Unit (Refer 3 in 1 Unit removal procedure). K. Remove of ground cables of E-drive.
RkJQdWJsaXNoZXIy MTIwNTUz