HV ELECTRICAL SYSTEM 41 C. VACUUM PUMP REMOVAL 1. Open the bonnet of the vehicle. 2. Refer Instructions of HV connector Lock removal process before starting work 3. Loosen and Remove the mounting screw and take out the motor cover. 4. Disconnect the electrical connection of vacuum pump. 5. Remove the mounting hose of vacuum pump & drain the oil (Refer maintenance section.) 6. Loosen and Remove the mounting screw and take out the vacuum pump. Fitment Follow reverse procedure for assembly. D. E-DRIVE REMOVAL A. Refer Instructions for working on HV Components mention before starting work. B. Refer Instructions of HV connector Lock removal process before starting work C. Loosen and Remove the mounting screws & grommet of splashguard. D. Loosen and Remove the mounting grommet & nut of Mud Liner RH and LH side E. Loosen and remove the mounting nut of tyre & take out (LH / RH side )
RkJQdWJsaXNoZXIy MTIwNTUz