HV ELECTRICAL SYSTEM 24 B. FAST CHARGING 1. Engage the parking brake. (Charging won’t start without engaging the parking brake). 2. Pull out the Charging Gun from DC/Fast Charging Station. 3. Open the protective cap on Charging Gun. 4. Pull the ‘Charging-inlet Flap Open Lever’ to open the charging door. 5. Open the charger-inlet flap. 6. If the actuator is engaged and the gun is not getting inserted properly, contact TML service center. CAUTION: If the Gun Lock is not released please don’t insert the Charging Gun forcefully into the socket. It may damage the Charging Socket. 7. Remove any dust on the Charging Gun and Charging Inlet. 8. Connect the charging gun to vehicle AC and DC Charging Inlet. 9. You hear a “click”, when the Gun is connected correctly. 10. Switch on the DC charging station supply. Image for Illustration purpose only 11. Charging Gun will be locked after switching on the DC charging station. Image for Illustration purpose only 12. Normally the car starts automatically charging. If not, please refer Charging Gun’s Fault Indication & Indi-cation Priority. NOTE: When vehicle is in Charging Mode, it will not go in Drive (D), Sport (S) or Reverse(R). 13. Open the driver door and see instrument cluster to know SoC, time to charge and gun connection status. 14. In case the park brake is not engaged or partially engaged the charging won’t start and ‘Engage Park Brake to start charging’ message will be displayed on instrument cluster. NOTE: Infotainment and cabin cooling can be used during charging of the vehicle by putting the vehicle in Ignition. 15. To stop the charging, switch off DC charging station. 16. The charging gun will be unlocked 15 to 19 seconds after switching off the supply from DC charging station. 17. Put on the protective caps on both Charging Gun and Vehicle Inlet.
RkJQdWJsaXNoZXIy MTIwNTUz