I/O DIAGRAM PM2.5 SENSOR: (IF AVAILABLE) III. It is fitted inside the dashboard near to the brake pedal. SERVICE SCHEDULE IV. V. PM2.5 SENSOR REMOVAL 1. Remove two push on clip and two nuts and move hush panel along with sensor. 2. Access the blower control module from driver side. Remove the electrical connection from the module. 3. Remove the mounting screws and take out the module along with the cover. FITMENT For fitment follow the removal procedure in reverse NOTE Vacuum the dust sensor as per the maintenance schedule SR NO OPERATION KMS / MONTHS 1 Clean filter and check Airconditioning / HVAC system for satisfactory performance Every Service 2 Replace Combi PM2.5 Filter. 15K / 12M FATC 68
RkJQdWJsaXNoZXIy MTIwNTUz