7. Assemble the wheel again. B. FRONT BRAKE DISC REMOVAL 1. Position the vehicle on two-post lift and remove front wheel by removing wheel mounting banjo nuts. 2. Remove brake caliper assembly & hang it properly with Brake Hose. 3. Release caliper assembly and tie aside clear off from brake disc. NOTE Re-install the caliper in the carrier, screw the banjo bolt (with copper gasket) to the recommended torque, then release the hose clamp, do bleeding operation and check for correct function of the caliper parts, ensure no drag and frictional noise. CAUTION Do not allow caliper to hang on brake hose as it may damage the hose. BRAKE (LR) 37
RkJQdWJsaXNoZXIy MTIwNTUz