9. Insert a screwdriver through the hole in drum and press against the hand brake lever (If applicable). A ‘click’ will be heard as the lever moves down. 10. This movement compresses the pistons in the wheel cylinder and thereby increases the clearance between the brake shoes and the drum (If applicable). Remove the rear sensor cable mountings on 11. the twist beam axle. Disconnect the bundy pipe/Hose from wheel 12. cylinder. Remove bleed screw. Put rubber dust cap on to the bundy pipe to avoid brake fluid from spilling and contamination. Remove Grommet trailing Arm. 13. Remove mounting screw from Gen-3 bearing 14. Mount. Remove four cap screw & take out bearing. 15. SUSPENSION (MR) 43
RkJQdWJsaXNoZXIy MTIwNTUz