4. Apply pressing load using special tool (part no 2779 5890 3501) ball joint housing collar until collar face butt with mating bush. 5. Circlip to be assembled after adequate fitment of ball joint. Ball Joint Repair Sizes H. OVERHAULING OF LOWER ARM PIVOT BUSH LOWER ARM FRONT PIVOT BUSH I. REMOVAL 1. Remove front pivot bush using special tools. INSTALLATION 1. Install pivot arm bush using special tools. NOTE Ball joint assembly type repair-1 having bigger OD to be used while replacement of ball joint first time and repair 2 for second times. NOTE Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation. SUSPENSION (MR) 36
RkJQdWJsaXNoZXIy MTIwNTUz