C. WHEEL HUB REMOVAL 1. Place the vehicle in the two-post lift and apply parking brake. 2. Remove wheel rim cover (If Fitted). 3. Loosen the wheel mounting bolts. 4. Lift the vehicle till the front wheels are off the ground. 5. Unscrew the wheel mounting bolts and remove the wheel. 6. Unscrew and remove tie rod ball joint nut. 7. Remove tie rod ball joint using puller part No. 2702 5890 4602. Image is for reference purpose only. 8. Support the lower arm from bottom. 9. Apply Brake. Unstack and unscrew drive shaft nut and take 10. out the thrust washer. Remove the caliper housing from the knuckle. 11. SUSPENSION (MR) 30
RkJQdWJsaXNoZXIy MTIwNTUz