2. Compress the spring with spring compression tool part No. 8855 2702 0040 to reduce length as done during disassembly. 3. Insert the compressed spring on the strut (ensure that the spring end to be butt with spring pad vertical wall). 4. Pull strut piston rod up to full extended length. 5. Insert bump stopper. 6. Assemble dust cover on the spring (ensure dust cover is properly located on spring). 7. Assemble bearing on the dust cover. 8. Assemble bearing dust cover on bearing. 9. Assemble top mount on bearing (ensure top mount M8 bolt head should be placed in the bearing slots). Fit Hex sp. Flange nut (1) and tighten to 6-7 10. Kg-m torque. Hold the piston rod by Allen key (A/F: 6 mm) to stop piston rod rotation during tightening of nut. Remove spring compression tool carefully. 11. Lock the dust cover with striker cap. 12. SUSPENSION (MR) 29
RkJQdWJsaXNoZXIy MTIwNTUz