REMOVAL & REFITMENT OF STEERING LOCK CUM IGNITION SWITCH (SLCIS): REMOVAL 1. Disconnect battery negative terminal. 2. Remove steering nacelle. (Refer “Removal & refitment of steering nacelle” from steering section.) 3. Remove steering wheel. (Refer “Removal & refitment of steering wheel” from steering section.) 4. Remove combi switch. (Refer “Removal & Refitment of combi switch. ) 5. Disconnect steering lock cum Ignition switch connection. 6. Steering lock cum ignition switch mounting screws are anti loosening. To remove the Ignition lock, screw to be loosened by using flat screw driver and hammer. 7. Remove assembly of SLCIS. REFITMENT: 1. Refit SLCIS and tighten its mounting screws. 2. Reconnect SLCIS connection. 3. Refit combination switch. 4. Refit steering Wheel. 5. Refit steering nacelle. 6. Refit battery negative terminal. Contacts Minimum Permanent Load Current at TEMP - 30°C Maximum Permanent Load Current at TEMP +23°C to +85°C Battery –Key in Sensor 10mA 30mA Battery –ACC 250mA 2A Battery –ON 250mA 2A Battery –Start 10mA 250mA LOW VOLTAGE ELECTRICAL SYSTEM (LV) 65
RkJQdWJsaXNoZXIy MTIwNTUz