CONNECTION DETAILS For Circuit refer Circuit Schematic section. CONDITION POSSIBLE CAUSE CORRECTION/REFERENCE ITEM parking lamp not working the lamp loose. 8/6 pole(if applicable) CPL lamp connector at the lamp loose. Grounding point loose Tighten the grounding properly No output from BCM Refer BCM Diagnosis Parking lamp LH/RH fuse (5A) Cabin fuse box loose/blown the circuit and then replace Fix the fuse properly in the base. i n If blown, check for short in the fuse Single rear parking lamp not working Grounding point loose Tighten grounding properly Parking lamp LH/RH fuse(5A) Cabin fuse box loose /blown Fix the fuse properly in the base, i n if blown, check for short in the circuit and then replace the fuse Bulb fused Replace bulb if blown Battery supply not reaching lamp LH/RH fuse input the discontinuity in the circuit Check the continuity from parking battery to the lamps through the combiswitch, Front W/Hand Floor W/H connectors and rectify No output from BCM Refer BCM Diagnosis Both parking lamps not working at all Combi switch connectors loose Fix the connectors properly Combi switch faulty Replace combi switch No output from BCM Refer BCM Diagnosis Registration plate lamp not working Grounding point loose Tighten grounding properly 2 pole lamp connector loose Fix connector properly Cabin lamp not working in ‘ON’ position Switch erratic Replace roof lamp 3 pole Roof lamp switch connector loose Tighten the connector No output from BCM Refer BCM Diagnosis LOW VOLTAGE ELECTRICAL SYSTEM (LV) 12
RkJQdWJsaXNoZXIy MTIwNTUz