CONDITION POSSIBLE CAUSE CORRECTION/REFERENCE ITEM No output from BCM Refer BCM Diagnosis Rear right / left turn signal lamps not working Grounding point loose Tighten grounding properly 6 pole Rear Lamp Connector loose Fix the connector properly Bulb fused Fix the bulb properly. Replace bulb if blown No output from BCM Refer BCM Diagnosis Both Turn Indicators not working Flasher fuse (10A) in cabin fuse box loose/blown(BASE & MID) Fix fuse properly in the base. Replace fuse if blown Flasher in cabin fuse box faulty(BASE & MID) Replace Flasher No output from BCM (HIGH) Refer BCM Diagnosis Side repeater lamps not working Connectors (2 pole) at the lamps loose Connect the connectors properly Bulb loose/ blown Fix the bulb properly. Replace bulb if blown Grounding point no. Tighten grounding properly No output from BCM (HIGH) Refer BCM Diagnosis Indicator lamps not working when hazard warning switch is operated 6 pole Rear Lamp Connector loose Fix the connector terminal properly Hazard warning switch faulty Replace switch No output from BCM Refer BCM diagnosis Reverse lamp not working Grounding point no. E00 loose Tighten grounding properly Bulb fused Replace bulb if blown 6 pole (option 1) tail lamp, 2 pole (option 2) reverse lamp connector loose Fix the connector properly Stop (Brake) lamps not working 6 pole tail lamp Connector loose Tighten the connector properly Bulbs fused Fix the bulbs properly. Replace bulbs if blown Brake lamp switch faulty Replace switch Stop Lamps are controlled by BCM. If issue not resolved by above methods, BCM diagnosis should be referred Stop(Brake) Lamp and High Mounted Stop Lamp not working Stop Lamp and High Mounted Stop lamp 10A. Fuse in Cabin Fuse Box Blown Replace Fuse Single front 6/4 pole(as applicable) DRL lamp connector at Fix connector properly(10 pole) loose LOW VOLTAGE ELECTRICAL SYSTEM (LV) 11
RkJQdWJsaXNoZXIy MTIwNTUz