BRAKES_MR 42 5. Recover the AC gas from vehicle. 6. Disconnect the AC gas suction hose. 7. Loosen & remove the AC gas suction hose to compressor mounting to avoid damage. 8. Remove the hose pipe TMC reservoir to I - VBAC Unit. 9. Remove the brake pipes from the unit and plug the unit ports with suitable grommet. 10.Identify the brake pipes going into and out of the Hydraulic Control Unit (HCU) with tags so that reinstallation of the brake lines becomes easy. 11.Disconnect I - VBAC connector & Motor connector. NOTE: Refer steps (i) and (ii) to disconnect I - VBAC Connector. (i) Press the unlock button and remove the lever from the lock and move towards unlocking position. (ii) Lock the lever to it is unlock position by pressing the lever till the Click sound is heard and remove the connector from unit. WARNING: Never apply a 12V power source to any terminal of the ECU connector when it’s disconnected. NOTE: Proper care must be taken before removing the brake pipes from HCU; the HCU must be thoroughly cleaned to prevent dirt particles
RkJQdWJsaXNoZXIy MTIwNTUz