INSTALLATION: 1. Align the marks made on the steering wheel and the shaft. Install steering wheel on steering shaft 2. Tighten the steering wheel nut to the specified torque. Tightening torque (Steering wheel nut) = 4Kg-m 3. Fit horn pad (Press fit type). 4. Connect battery. STEERING COLUMN REMOVAL II. 1. Disconnect the connection of battery. Remove steering wheel (Refer Steering wheel 2. removal procedure). Remove the dashboard bottom cover (Refer 3. body section). 4. Remove 2 number of screws of nacelle bottom cover. 5. Lower the steering column tilt adjuster handle. 6. Remove the lower nacelle mounting nut on steering column & take out the nacelle bottom cover. STEERING_MANDO 10
RkJQdWJsaXNoZXIy MTIwNTUz