SUSPENSION_LR 32 B. Lower arm Rear pivot bush Removal: 1. Remove rear pivot bush using special tools as shown in below arrangement. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation. Installation: 2. Install rear pivot bush using special tools as shown in below arrangement. v. INSTALLATION OF SUBFRAME ASSEMBLY 1. Assemble the ball joint assembly to the lower arm. 2. Position the lower arm to the Subframe and tighten its front and rear pivot bush bolts. NOTE: Lower control arm fitment on subframe in ECIE condition as below 3. Assemble anti roll bar to Subframe.
RkJQdWJsaXNoZXIy MTIwNTUz