3. TIGHTENING TORQUES *MARKED BOLTS TO BE TIGHTEN IN PRE-LOADING CONDITIONS. NOTE Unless otherwise specified, no oil/lubricant/thread-locker/anti-rust allowed on fastener, fastener bearing • surface or surface where the fastener will sit while assembly. All self-locking type fasteners not to be reused once joint is dismantled. Use of appropriate thread locker has been mentioned at required locations. Carefully go through the • service manual for the same. Before reassembly, inspect the mating surfaces for any defects/deposits/burr/debris/deadner. Similarly • inspect the nut and bolt thread surfaces also. To be corrected/removed for a sound joint. Use only calibrated torque wrenches. • SR. NO. DESCRIPTION FASTNER TYPE TORQUE VALUE (KG-M) LOCATION FRONT SUSPENSION 1. FRONT STRUT MOUNTING ON KNUCKLE M12X1.25 14 ± 0.7 2. Strut top mounting NYLOC NUT M8 2.3 ± 0.1 3 Driveshaft lock nut LOCK NUT 24.5 ± 1.5 SUSPENSION_PETROL 6
RkJQdWJsaXNoZXIy MTIwNTUz