ON VEHICLE ASSEMBLY OF DRIVE 10. SHAFT (LH & RH SIDE) 1. Install the Drive shaft into Knuckle End. 2. Install the Drive shaft into Gear Box End. 3. Install 3 allen bolt of intermediate shaft & Fix the Drive shaft on intermediate bracket. 4. Insert the LCA ball joint in knuckle & tighten the mounting fastener with torque 5.5 Kg-m. 5. Insert the steering Link ball joint into knuckle & tighten the nyloc nut with torque 7 ± 0.5 kgm. 6. By Using allen Key and Connect Upper ARB Link onto the Front Strut. DRIVESHAFT DCT 13
RkJQdWJsaXNoZXIy MTIwNTUz