9. ON VEHICLE REMOVAL OF DRIVE SHAFT (LH & RH SIDE) 1. Position the vehicle properly on the two-post lift & Lift it. 2. Drain the Transaxle oil through Drain Plug. 3. Remove Wheel Cap. 4. Loosen Front wheel nuts. 5. Lift the vehicle 6. Remove Front Wheels. 7. Remove Mud Liner. 8. Apply Brake and Remove Drive shaft Lock Nut. 9. Use Allen key and disconnect upper ARB link from Front strut. Remove ball joint (steering rack) from steering 10. knuckle from RH & LH sides using tool part no. 2702 5890 4602.(Refer Steering Section) DRIVESHAFT DCT 11
RkJQdWJsaXNoZXIy MTIwNTUz