FITMENT 1. Place a new oil cooler seal and/or a new cooler. 2. Place bolts 1 and 3 with the elongated heads. Place bolts 2 and 4 with the short heads 3. Manually turn the bolts for at least two full rotations before using a tightening tool. 4. Tighten the sensor bolts to the final torque level and sequence specified in the External Specification using a calibrated tightening tool. 5. Connect inlet and outlet hose of transmission oil cooler and tighten the hose clips. TOOLS T-EF-1: Extended cooler bolt bit Bit for Torx T30 T-EF-2: Short cooler bolt bit Bit for Torx T40 Dual Clutch Transmission (DCT) 57
RkJQdWJsaXNoZXIy MTIwNTUz