Remove connecting rod. 13. Using ring expander, remove piston rings 14. Position flywheel locking tool to lock flywheel 15. as shown below. Remove flywheel mounting bolts and take out 16. flywheel. Remove Rear oil seal. 17. Turn the bench at 180° to remove crankshaft 18. from bottom side. Remove the bedplate by removing the 19. mounting bolts. NOTE Keep each piston and gudgeon pin as a set, • when removed. Petrol Engine Ph-2 (CAFÉ)_DCT 139
RkJQdWJsaXNoZXIy MTIwNTUz