4. Remove both the camshafts. 5. Remove ITG bearing cap lower. 6. Loosen and remove the head cylinders mounting bolts. 7. To dislocate cylinder head, use a soft mallet or dead-blow hammer to break the head free from the block, if necessary. 8. Place the cylinder head on the dismantling table. CAUTION When removing the camshaft, use care to • avoid damaging the bearing surfaces of the cylinder head and the camshaft. Petrol Engine Ph-2 (CAFÉ)_DCT 134
RkJQdWJsaXNoZXIy MTIwNTUz