Lock the balancer shaft in the bedplate using 14. a locking bolt (5715 0310 9904) as shown below. Remove the mounting bolt of the balancer 15. shaft gear and take out the gear. REMOVAL OF CYLINDER HEAD AND VII. CAMSHAFT 1. Remove the rear intermediate bearing of the camshafts. 2. Remove the Camshaft Bearing Caps attaching bolts, starting from the ends of the cylinder head and working inwards to center. 3. Remove front ITG bearing cap upper. Petrol Engine Ph-2 (CAFÉ)_DCT 133
RkJQdWJsaXNoZXIy MTIwNTUz