6. Remove driveshaft lock nut LH& RH. 7. Remove ball joint (steering rack) from steering knuckle from both sides. 8. Remove vertical link mountings on suspension rod for both RH & LH sides. Remove 3 allen bolt of intermediate shaft & 10. take out Drive shaft from driver side. Remove Drive shaft from co-driver side. 11. FITMENT For fitment follow the reverse procedure of removal. NOTE Care should be taken not to damage • driveshaft oil seal and its boots (do not use hammer). CAUTION Do not pull drive shaft excessively as the • plunge joint will come out of housing and damage the boot Pry. Plunge joint housing for taking out joint out of splines. Do not place the CV drive shaft on rough / uncleaned surfaces. This might damage the drive shaft boot. DRIVESHAFT MT_AMT 12
RkJQdWJsaXNoZXIy MTIwNTUz